Contents:
– One-on-one session with WJ (approx. 5 hours)
– Work on your own cylinder
– Practical guidance from start to finish
– Immediate feedback throughout the process
Description:
During this one-on-one session, you’ll work with WJ on your own Piaggio 125/180cc cylinder.
Not just theory from a book, but real-world tuning—on your own cylinder.
In about 5 hours, you’ll learn how to measure gates correctly, how timing and gate angles work, and how to handle different head depths and setups. Everything is explained step by step as you go through the process yourself.
In addition, we'll work with you to mill your cylinder for a Stage 2 setup.
We’ll also design a small custom logo that you can mill into the cylinder afterward—a unique finishing touch for your build.
During the session, we will be using professional tools from WJ-Tuning.
What you'll learn:
– Measuring pockets and determining timing
– Working with different head depths and setups
– The influence of timing and pocket angles
– Practical pocket milling
– Common mistakes and how to avoid them
Important information:
– Duration: approx. 5 hours (10:00 a.m.–3:00 p.m.)
– For Piaggio 125/180cc cylinders only
– Please bring your own cylinder
– One-on-one session (no other participants)
– Date and time to be arranged
– Limited availability
Disclaimer:
All work is performed at your own risk. WJ-Tuning is not responsible for damage to parts caused by improper execution during or after the session.
Tip:
Make sure your cylinder is clean and ready for work. Work carefully—small adjustments can make a big difference in performance and reliability.
License:
For personal use only.
The content of this session may not be shared or used for commercial purposes without permission.
© WJ-Tuning – All Rights Reserved
Contents:
– One-on-one session with WJ (approx. 5 hours)
– Work on your own cylinder
– Practical guidance from start to finish
– Immediate feedback throughout the process
Description:
During this one-on-one session, you’ll work with WJ on your own Piaggio 125/180cc cylinder.
Not just theory from a book, but real-world tuning—on your own cylinder.
In about 5 hours, you’ll learn how to measure gates correctly, how timing and gate angles work, and how to handle different head depths and setups. Everything is explained step by step as you go through the process yourself.
In addition, we'll work with you to mill your cylinder for a Stage 2 setup.
We’ll also design a small custom logo that you can mill into the cylinder afterward—a unique finishing touch for your build.
During the session, we will be using professional tools from WJ-Tuning.
What you'll learn:
– Measuring pockets and determining timing
– Working with different head depths and setups
– The influence of timing and pocket angles
– Practical pocket milling
– Common mistakes and how to avoid them
Important information:
– Duration: approx. 5 hours (10:00 a.m.–3:00 p.m.)
– For Piaggio 125/180cc cylinders only
– Please bring your own cylinder
– One-on-one session (no other participants)
– Date and time to be arranged
– Limited availability
Disclaimer:
All work is performed at your own risk. WJ-Tuning is not responsible for damage to parts caused by improper execution during or after the session.
Tip:
Make sure your cylinder is clean and ready for work. Work carefully—small adjustments can make a big difference in performance and reliability.
License:
For personal use only.
The content of this session may not be shared or used for commercial purposes without permission.
© WJ-Tuning – All Rights Reserved
| Subtotal | €636.78 |
|---|---|
| Shipping |
|
| Total | €636.78 (including €110.50 VAT) |
